Beijing Chunmingfangtong Electronics Co

Goat electric shearing machine, sheep electric shearing machine, wool shearing machine, wool shearing electric clipper price. The electric wool shear draws on international advanced technology, comprehensively considers various use environments, has advanced and reasonable design, and has wide adaptability. It has a compact structure, light weight, small vibration, low operating temperature rise, flexible and reliable operation, and simple maintenance. It is suitable for various types of wool collection and brush making applications. The blade has high hardness, good toughness, wear resistance, and sharpness. The blade tip is finely manufactured, has good combing properties, and is not easy to hurt sheep. It is suitable for shearing different sheep species in different countries, regions, seasons, and species around the world. There are also blades for shearing horses, cattle and other livestock. Features and Advantages: It saves time and can shear a sheep in one hour. It is suitable for family breeding or pasture breeding. Labor-saving, the scissors have a humanized handle structure, so your hands will not get tired after long hours of shearing. Easy to get started and suitable for most shearing novices. It has a wide range of applications and is suitable for most crossbred sheep, fine wool sheep and bonded wool. Shearing in winter can leave a certain thickness of fur layer. Product introduction:
The electric wool shear directly drives the moving blade and is safe to use/
Highly efficient/
Flexible and convenient to operate. Compared with the traditional flexible shaft electric wool shear, it has the following advantages:< br/> .
A soft cable is used instead of the flexible shaft, thereby eliminating the torque exerted by the flexible shaft on the human hand, making it convenient and flexible to use.
.
Small power consumption and energy saving
.
Working with low noise and vibration
&.
Fast shearing speed and good shearing quality Product introduction: br/> Technical parameters: Rated voltage:
~
No-load speed:
R/
Input power:
Net weight:
.
Gross weight:
.
Two
Instructions for use:
*Pressure adjustment between the moving and stationary blades
. Adjust the pressure of the moving blade to the appropriate value before use, that is, do not feed Do not tighten too much to avoid damaging the blade (subject to being flexible and smooth without clamping wool). It has a built-in pressure spring and has a certain self-pressurizing function.
After use, adjust the pressure of the dynamic and static blades to the minimum (unscrew the pressure adjustment lever)
*Be sure to turn off the machine during the interval between shearing processes and unplug the power supply after use.
*Operations when replacing the blade:
. First loosen the pressure of the blade (unscrew the pressure adjustment cap)
. Loosen the two screws that fix the static blade
. Install the new blade but do not tighten it and then install the movable blade. Note that the static blade must expose the blade. At this time, fix the screw. Of course, check that the left and right swing range of the movable blade must be symmetrical
*Blade cleaning< br/> During use, if there is oil accumulation between the blade teeth, you need to use a brush to clean it in a cleaning agent (such as detergent/washing powder solution), kerosene, gasoline, and dry the cleaning liquid with a cotton cloth
* Maintenance is a matter of note:
. When you find that the moving or static blades are loose, you should stop the machine immediately and fix the blades before use
. Do not turn on the machine if the blades are not installed or mounted properly, and do not use it during no-load time when the sheep are not being sheared. Too long to avoid damage to the blade
If not in use, coat the blade with butter and store it in a dry place
. Before loosening the pressure cap to relieve the pressure, turn off the power source
. Must be used The small cones at the front ends of the two claws are stably pressed into the two small conical holes on the movable blade, otherwise the pressure cannot be corrected
. The electric wool shear must not be disassembled by holding it in a vise, and must be adjusted or repaired The electric shear should be placed on a clean workbench or held tightly in the hand, and used for disassembly using special tools
*Consumable parts
After shearing the first sheep, it is necessary to comprehensively inspect the entire electric shear. Small parts that are found to be excessively worn should be replaced in time. This can extend the life of large parts and save costs. Parts can be disassembled at will, and the parts that require daily maintenance must be strictly followed by the instructions. Since this design mostly uses direct contact spherical friction kinematic pairs, reasonable lubrication and maintenance are very important to the service life of the whole machine.
Agricultural Bank of China card number: Cardholder: Wang Yansu
Contact number: && Wang Yansu